WEBVTT

1
00:00:05.740 --> 00:00:08.020
Ideal is pleased
to announce our new Cat5e

2
00:00:08.590 --> 00:00:11.590
feed through modular plug
and FT45

3
00:00:11.590 --> 00:00:13.090
crimp tool product line.

4
00:00:13.750 --> 00:00:15.400
Step one is to remove
approximately one

5
00:00:15.400 --> 00:00:18.280
and a half inches of outer
jacketing using a UTP

6
00:00:18.300 --> 00:00:19.660
stripping tool.

7
00:00:19.660 --> 00:00:22.310
Then remove the nylon rip
cord with a pair of snips.

8
00:00:23.160 --> 00:00:25.110
Then fold out the pairs
where they are naturally

9
00:00:25.110 --> 00:00:26.720
laying around the outer
jacketing.

10
00:00:27.880 --> 00:00:29.590
Step two, grip the cable
at the end

11
00:00:29.590 --> 00:00:31.560
of the jacketing
and untwist and straighten

12
00:00:31.580 --> 00:00:33.590
each of the pairs,
leaving them in the four

13
00:00:33.590 --> 00:00:35.090
separate corners.

14
00:00:35.810 --> 00:00:37.490
Then,
using the 568B wiring

15
00:00:37.490 --> 00:00:39.240
configuration,
put the pairs

16
00:00:39.240 --> 00:00:40.970
in the proper order
from left to right,

17
00:00:41.390 --> 00:00:43.340
double checking that they
are in the correct order.

18
00:00:44.660 --> 00:00:46.350
The straighter the wires
are, and the closer

19
00:00:46.350 --> 00:00:48.260
they are together,
the easier it will be

20
00:00:48.260 --> 00:00:49.760
to attach the plug.

21
00:00:50.460 --> 00:00:51.460
Step 3.

22
00:00:51.460 --> 00:00:52.970
Trim the ends
of the conductors

23
00:00:52.970 --> 00:00:54.810
straight across using
the snips.

24
00:00:55.440 --> 00:00:57.690
This allows the conductors
to slide freely

25
00:00:57.690 --> 00:00:59.190
through the connector.

26
00:00:59.400 --> 00:01:00.720
Then
insert the trimmed pairs

27
00:01:00.720 --> 00:01:02.910
into and through the Cat5e
plug,

28
00:01:03.740 --> 00:01:04.860
making
sure the white-orange

29
00:01:04.860 --> 00:01:07.310
conductor is to the left,
and the gold

30
00:01:07.310 --> 00:01:09.190
pins on the connector
are facing you.

31
00:01:11.080 --> 00:01:12.120
Step 4.

32
00:01:12.120 --> 00:01:13.370
Insert the symbol
connector

33
00:01:13.370 --> 00:01:15.530
inside the crimping tool
and crimp the connector.

34
00:01:17.020 --> 00:01:20.070
The ideal feed-through
RJ45 modular plugs

35
00:01:20.190 --> 00:01:23.740
and FT45 crimping tool
are designed to simplify

36
00:01:23.740 --> 00:01:25.420
and improve
the consistency

37
00:01:25.750 --> 00:01:28.570
of cable-to-connector
termination of Cat5e

38
00:01:29.140 --> 00:01:31.980
and Cat6 modular plugs
to twisted pair cables.