WEBVTT

1
00:00:05.000 --> 00:00:07.630
The Liebuilt cabinet series
meets your storage needs

2
00:00:07.630 --> 00:00:10.510
with effortless builds
and simple functionality.

3
00:00:12.000 --> 00:00:14.400
To assemble, you'll need a driver,
driver bits,

4
00:00:14.630 --> 00:00:16.130
and Phillips head screwdriver.

5
00:00:17.500 --> 00:00:21.560
Begin by attaching the 135 degree
angle braces to the face frame

6
00:00:21.740 --> 00:00:24.080
using 1 half inch flat head
Phillips screws.

7
00:00:25.660 --> 00:00:27.690
Lift the face frame
and attach the left

8
00:00:27.690 --> 00:00:31.070
and right front side panels
along the face frame grooves.

9
00:00:32.800 --> 00:00:35.900
Secure both with inch
flathead Phillips screws.

10
00:00:37.620 --> 00:00:40.300
Next, attach corner braces
to the bottom of the face frame

11
00:00:40.490 --> 00:00:42.960
using inch roundhead Phillips screws.

12
00:00:44.520 --> 00:00:48.340
The bottom panel is then inserted
and secured with inch round head

13
00:00:48.340 --> 00:00:49.840
Phillips screws.

14
00:00:50.640 --> 00:00:54.210
Use inch round head Phillips screws
to attach corner braces to the top

15
00:00:54.210 --> 00:00:55.710
of the face frame.

16
00:00:56.120 --> 00:01:00.250
Follow by inserting and securing
the box top panel with inch round

17
00:01:00.250 --> 00:01:01.750
head Phillips screws.

18
00:01:02.780 --> 00:01:06.010
Secure the box top panel to the left
and right front side panels

19
00:01:06.200 --> 00:01:10.010
using corner braces and one-half inch
round head Phillips screws.

20
00:01:11.160 --> 00:01:13.080
Repeat the process with the box
bottom panel.

21
00:01:13.990 --> 00:01:16.940
Next, slide the left rear side panel
into place.

22
00:01:17.690 --> 00:01:21.900
Attach it to the box top and bottom
panels using braces and inch round

23
00:01:21.900 --> 00:01:23.400
head Phillips screws.

24
00:01:24.600 --> 00:01:28.340
Place the adjustable shelf clips
at your desired height on the left

25
00:01:28.340 --> 00:01:31.350
and right front side panels,
then insert the shelves.

26
00:01:32.600 --> 00:01:35.700
Attach shelf clips to the back panel
at the same height as the front

27
00:01:35.700 --> 00:01:37.200
panels.

28
00:01:37.820 --> 00:01:42.070
Insert the box back panel into place
securing it with a corner brace

29
00:01:42.490 --> 00:01:44.630
and one half inch round head phillips
screws.

30
00:01:45.600 --> 00:01:47.700
Slide the right rear side panel
into place.

31
00:01:48.290 --> 00:01:52.220
Secure it using corner braces and one
half inch round head phillips screws.

32
00:01:53.090 --> 00:01:56.450
Secure the left and right rear side
panels to the boxed back panel

33
00:01:56.860 --> 00:01:58.980
using 1-inch flathead Phillips
screws.

34
00:02:00.000 --> 00:02:02.590
Connect the hinges to the door panel
with 5-eighths inch

35
00:02:03.050 --> 00:02:04.550
flathead Phillips screws.

36
00:02:05.090 --> 00:02:07.780
Locate pre-drilled holes
and attach the door panel

37
00:02:07.860 --> 00:02:09.980
using 3-quarter inch roundhead
Phillips screws.

38
00:02:12.080 --> 00:02:15.250
Built-in screws allow you to make
adjustments to the door, if needed.

39
00:02:16.150 --> 00:02:19.030
Lastly, attach rubber bumpers
to the top and bottom corners

40
00:02:19.030 --> 00:02:20.520
of the door panel.

41
00:02:20.520 --> 00:02:23.810
Streamlined projects of every scope
and size with Reliabilt,

42
00:02:24.080 --> 00:02:25.960
now available at Lowes.com.