WEBVTT

1
00:00:00.200 --> 00:00:02.850
Aim higher with Dab Spray
Texture 2-in-1 Wall

2
00:00:02.850 --> 00:00:04.490
and Ceiling with AimTech
Nozzle,

3
00:00:04.990 --> 00:00:06.460
bringing
professional results

4
00:00:06.460 --> 00:00:09.570
with ultimate performance
in function, formula,

5
00:00:09.570 --> 00:00:11.070
and finish.

6
00:00:11.240 --> 00:00:13.270
For use, be sure to prep
your work area

7
00:00:13.270 --> 00:00:14.910
with the proper tools
for your project.

8
00:00:15.720 --> 00:00:17.220
When selecting
the appropriate texture

9
00:00:17.220 --> 00:00:18.850
finish,
be sure to understand

10
00:00:18.850 --> 00:00:20.850
which texture is currently
on the surface.

11
00:00:21.300 --> 00:00:23.170
To start,
shake the can vigorously

12
00:00:23.240 --> 00:00:24.600
for at least one minute
after hearing

13
00:00:24.600 --> 00:00:26.100
the marble moving freely.

14
00:00:26.470 --> 00:00:28.710
Then, unlock the tab
by bending backwards.

15
00:00:29.040 --> 00:00:30.710
Adjust and twist
the Ametek nozzle

16
00:00:30.760 --> 00:00:32.670
to desired spray angle
and texture size.

17
00:00:32.990 --> 00:00:35.020
Before spraying on any
surface, dispense

18
00:00:35.020 --> 00:00:37.260
a quick burst on the scrap
material to activate

19
00:00:37.260 --> 00:00:38.270
and practice.

20
00:00:38.270 --> 00:00:39.940
As you begin treating
your wall or ceiling,

21
00:00:40.130 --> 00:00:41.470
spray using Intermittent
Burst

22
00:00:41.470 --> 00:00:42.970
in a continuous sweeping
motion.

23
00:00:43.680 --> 00:00:45.840
For superior blending,
feather texture

24
00:00:45.840 --> 00:00:47.340
into surrounding repair
area.

25
00:00:47.720 --> 00:00:50.110
When using knockdown,
allow at least 30 seconds

26
00:00:50.110 --> 00:00:52.650
set time before knocking
down, then let dry.

27
00:00:53.290 --> 00:00:54.850
Allow at least 30 minutes
dry time

28
00:00:54.890 --> 00:00:56.170
prior to painting.

29
00:00:56.170 --> 00:00:57.580
Once finished, place
the nozzle

30
00:00:57.580 --> 00:01:00.020
in the upright position
and turn can upside down.

31
00:01:00.270 --> 00:01:02.740
Spray excess texture
onto a disposable surface

32
00:01:02.810 --> 00:01:04.310
until it
finishes dispensing.

33
00:01:04.340 --> 00:01:06.920
For reusability purposes,
it is important to remove

34
00:01:06.920 --> 00:01:09.160
any texture build-up
from tip, re-lock safety

35
00:01:09.160 --> 00:01:09.930
tab,
and store

36
00:01:09.930 --> 00:01:11.300
in cool conditions.

37
00:01:11.300 --> 00:01:12.670
Dab Spray Texture.

38
00:01:12.670 --> 00:01:15.600
Aim higher in function,
formula and finish.