WEBVTT

1
00:00:04.990 --> 00:00:08.020
Here are some do's and don'ts
to perfect your spray texture

2
00:00:08.020 --> 00:00:09.400
application.

3
00:00:09.400 --> 00:00:13.340
Most pressure problems with texture
spray are driven by lack of shaking

4
00:00:13.340 --> 00:00:14.840
before application.

5
00:00:14.880 --> 00:00:18.300
Do shake the can for at least one
full minute after hearing

6
00:00:18.300 --> 00:00:19.800
the marble inside.

7
00:00:19.880 --> 00:00:22.580
Do not stop shaking just because you
can hear the marble.

8
00:00:22.880 --> 00:00:25.900
Do not stop shaking even if you
think the contents are mixed.

9
00:00:28.100 --> 00:00:31.400
If you're not getting enough texture
definition or texture is runny,

10
00:00:31.560 --> 00:00:32.880
you may be spraying too close
to the wall.

11
00:00:32.880 --> 00:00:34.380
to the wall.

12
00:00:34.610 --> 00:00:37.660
Texture should be applied at least 12
inches from the wall.

13
00:00:39.600 --> 00:00:42.920
Texture spray should be applied
in short intermittent bursts

14
00:00:43.000 --> 00:00:46.600
with random patterns,
such as circular motions or left

15
00:00:46.600 --> 00:00:48.100
to right or up and down.

16
00:00:48.300 --> 00:00:51.600
It is harder to achieve a texture
match by applying continuously.

17
00:00:52.640 --> 00:00:55.280
When knocking down texture,
make sure your putty knife

18
00:00:55.280 --> 00:00:57.640
is parallel to the wall,
not perpendicular.

19
00:00:57.860 --> 00:01:00.060
A perpendicular knife
will remove the texture.

20
00:01:06.510 --> 00:01:11.690
DAP 2-in-1 Wall and Ceiling Spray
Texture has customizable texture size

21
00:01:11.810 --> 00:01:15.610
by simply rotating the actuator
nozzle to the left or to the right.

22
00:01:17.030 --> 00:01:21.620
For seamless texture repairs,
trust DAP 2-in-1 Wall and Ceiling

23
00:01:21.620 --> 00:01:24.590
Spray Texture with patented AIM-TEC
nozzle.