WEBVTT

1
00:00:04.840 --> 00:00:08.220
Introducing SD Home Products Drywall
Repair Kit.

2
00:00:08.660 --> 00:00:12.160
It comes with everything
you need to patch a 2 to 5 inch hole

3
00:00:12.160 --> 00:00:13.300
in your wall.

4
00:00:13.300 --> 00:00:16.740
Our wall patch patches holes
in drywall from the inside out.

5
00:00:17.260 --> 00:00:19.860
This gives you a much cleaner
and stronger patch

6
00:00:20.050 --> 00:00:21.620
than the other patches on the market.

7
00:00:22.280 --> 00:00:27.900
Comes with the wall plate, the patch
compound, a dual grit sanding block,

8
00:00:28.480 --> 00:00:29.980
and a plastic trowel.

9
00:00:30.000 --> 00:00:32.160
To begin, measure the hole
in your wall.

10
00:00:33.080 --> 00:00:34.880
Trim the wall plate with scissors,
if needed.

11
00:00:36.380 --> 00:00:37.880
Assemble the wall plate.

12
00:00:43.480 --> 00:00:46.060
Fold and insert the wall plate
into the wall.

13
00:00:47.640 --> 00:00:49.740
Pop out the hand grip
to hold onto the wall plate.

14
00:00:49.980 --> 00:00:51.640
Begin to rotate the tension bar.

15
00:00:51.860 --> 00:00:53.800
Use a drill to speed up the process.

16
00:00:54.220 --> 00:00:55.380
Do not over-tighten.

17
00:00:55.380 --> 00:00:56.740
Replace the hand grip.

18
00:00:56.740 --> 00:00:58.560
Cut off excess tension bolt.

19
00:00:58.820 --> 00:01:01.660
Identify the step one bag and cut off
the top.

20
00:01:02.400 --> 00:01:06.030
Then add one cup of water
to the contents of the bag.

21
00:01:07.720 --> 00:01:12.440
Twist the top of the bag and mix
its contents with your hand until it

22
00:01:12.440 --> 00:01:13.670
is completely mixed.

23
00:01:13.670 --> 00:01:16.760
Cut the corner of the bag
and squirt the contents into the hole

24
00:01:16.760 --> 00:01:18.260
in the wall.

25
00:01:18.960 --> 00:01:23.220
Fill in the hole with the trowel.

26
00:01:23.220 --> 00:01:24.720
Lastly, let dry.

27
00:01:26.440 --> 00:01:30.960
Repeat the previous mixing steps
but this time with the step two bag

28
00:01:30.960 --> 00:01:32.880
and only a quarter cup of water.

29
00:01:33.700 --> 00:01:36.980
Float the material around the edges
and use the trowel

30
00:01:36.980 --> 00:01:38.720
to flatten the excess material.

31
00:01:39.820 --> 00:01:41.760
Now let the material dry.

32
00:01:42.780 --> 00:01:47.260
Sand down the excess material
first using the 150 grit blue side

33
00:01:47.260 --> 00:01:51.160
of the dual grit sanding block
and then using the 220 grit

34
00:01:51.160 --> 00:01:53.520
green side of the dual grit
sanding block.

35
00:01:53.760 --> 00:01:56.240
Finally you are ready to texture
or paint.

36
00:01:56.860 --> 00:02:00.500
Combine both our SD Helms Wall Plate
and Patch Compound

37
00:02:00.500 --> 00:02:02.160
for the perfect wall patch.