WEBVTT

1
00:00:02.520 --> 00:00:05.040
Hisense Portable Air Conditioner
Installation

2
00:00:06.560 --> 00:00:08.460
Please read and follow
the instructions

3
00:00:08.460 --> 00:00:10.860
in the owner's manual before you
attempt to install,

4
00:00:11.070 --> 00:00:13.820
operate, maintain,
or troubleshoot your portable air

5
00:00:13.820 --> 00:00:14.720
conditioner.

6
00:00:14.720 --> 00:00:17.660
It is recommended to always place
your portable air conditioner

7
00:00:17.660 --> 00:00:19.860
on a flat and level surface
for optimal performance.

8
00:00:21.100 --> 00:00:24.040
Measure the install location
before placing your portable air

9
00:00:24.040 --> 00:00:25.820
conditioner to ensure a proper fit.

10
00:00:26.120 --> 00:00:27.620
Caution, the unit is heavy.

11
00:00:27.900 --> 00:00:29.760
Have someone assist
you with your portable air

12
00:00:29.760 --> 00:00:32.680
conditioner to help prevent product
damage or personal injury.

13
00:00:33.400 --> 00:00:36.150
Take a moment to see what tools
are needed for installation.

14
00:00:38.400 --> 00:00:41.760
Unbox your new portable air
conditioner and remove all packaging

15
00:00:41.760 --> 00:00:43.260
materials.

16
00:00:46.920 --> 00:00:50.000
Remove the portable air conditioner
from the foam base and place

17
00:00:50.000 --> 00:00:52.720
it on a flat and level surface
near the install location.

18
00:00:57.360 --> 00:00:59.220
Portable air conditioner components.

19
00:00:59.780 --> 00:01:04.030
Flexible exhaust hose and foam seals,
owner's manual, remote,

20
00:01:04.200 --> 00:01:05.900
quick start guide, and warranty card.

21
00:01:06.400 --> 00:01:08.460
Coupling and window exhaust adapter.

22
00:01:08.820 --> 00:01:11.740
Both have integral clips
that snap onto the vent hose.

23
00:01:16.800 --> 00:01:19.190
Sliding window vent and extension
panels.

24
00:01:21.860 --> 00:01:23.920
Flexible exhaust hose and adapter.

25
00:01:24.860 --> 00:01:27.760
Insert the coupling into the slot
on the back of the portable air

26
00:01:27.760 --> 00:01:28.680
conditioner.

27
00:01:28.680 --> 00:01:30.860
Slide it in to lock the hose
in place.

28
00:01:33.320 --> 00:01:35.900
Once secure, you can now fully
retract the hose.

29
00:01:36.620 --> 00:01:38.640
Window vent panel and extensions.

30
00:01:39.040 --> 00:01:41.680
The window installation kit
allows you to install the air

31
00:01:41.680 --> 00:01:45.200
conditioner in most vertical sliding
windows 18 to 50 inches

32
00:01:45.200 --> 00:01:48.900
wide or horizontal sliding windows
from 18 to 50 inches tall.

33
00:01:49.380 --> 00:01:52.520
Measure the length of your window
and choose the vent panels that best

34
00:01:52.520 --> 00:01:53.740
fit your needs.

35
00:01:53.740 --> 00:01:56.560
Insert the vent panel assembly
into the window opening

36
00:01:56.560 --> 00:02:00.100
with the pre-drilled holes facing up,
and extend it to the maximum length

37
00:02:00.100 --> 00:02:01.020
of the window.

38
00:02:01.020 --> 00:02:05.040
While holding the vent panel assembly
firmly in place, use a marker or pin

39
00:02:05.040 --> 00:02:06.900
to create an indicator mark
at the top.

40
00:02:07.180 --> 00:02:10.560
In some cases, the pre-drilled holes
may not align properly

41
00:02:10.560 --> 00:02:11.930
to the window's dimension.

42
00:02:11.930 --> 00:02:14.760
Create an indicator mark
that will help ensure a proper fit.

43
00:02:15.180 --> 00:02:18.160
Use a drill and drill bit
to create a matching pilot hole

44
00:02:18.160 --> 00:02:19.660
in the extension panel.

45
00:02:20.160 --> 00:02:23.260
Use the rivet to hold the window vent
panel and extension panel

46
00:02:23.260 --> 00:02:25.290
together at the pre-drilled hole
you marked.

47
00:02:29.930 --> 00:02:32.300
Measure and cut the long adhesive
foam seals

48
00:02:32.300 --> 00:02:34.890
to match the extended length
of the vent panel assembly.

49
00:02:38.990 --> 00:02:42.440
Two short foam seals are also
provided to place onto each side

50
00:02:42.440 --> 00:02:43.940
of the vent panel assembly.

51
00:02:44.920 --> 00:02:47.820
Peel off the plastic
on the adhesive foam seals and attach

52
00:02:47.820 --> 00:02:49.820
them directly
to their respective sides.

53
00:02:50.800 --> 00:02:54.080
Reinsert the window vent panel
assembly inside the window frame

54
00:02:54.080 --> 00:02:55.450
to double check the fitting.

55
00:02:55.450 --> 00:02:58.520
If more room is needed to attach
the flexible exhaust hose

56
00:02:58.520 --> 00:03:01.900
adapter, add additional layers
of foam seal below the vent panel

57
00:03:01.900 --> 00:03:05.020
assembly to increase the height
all around the assembly for a tighter

58
00:03:05.020 --> 00:03:05.680
fit.

59
00:03:05.680 --> 00:03:09.540
After the window vent panel assembly
has been properly fitted, insert

60
00:03:09.540 --> 00:03:12.010
and clamp down the window
exhaust adapter as shown

61
00:03:12.010 --> 00:03:13.510
into the vent panel's opening.

62
00:03:14.640 --> 00:03:18.100
To prevent the window exhaust adapter
from sliding out of the vent panel

63
00:03:18.100 --> 00:03:21.320
opening, insert the two screws
provided in the exhaust adapter

64
00:03:21.320 --> 00:03:22.120
holes.

65
00:03:22.120 --> 00:03:25.080
Reinsert the vent panel assembly
inside the window frame

66
00:03:25.080 --> 00:03:26.580
and close the window.

67
00:03:30.660 --> 00:03:33.660
Insert the foam insulation
between the window frame to help

68
00:03:33.660 --> 00:03:35.160
reduce air gaps.

69
00:03:36.740 --> 00:03:39.700
For additional support,
you can attach a window lock bracket

70
00:03:39.730 --> 00:03:42.520
to the top of a wood window frame
as shown in this example.

71
00:03:43.800 --> 00:03:47.020
Retract the vent hose
and allow at least 20 inches of space

72
00:03:47.040 --> 00:03:48.790
all around the portable air
conditioner.

73
00:03:49.170 --> 00:03:52.040
Plug your new portable air
conditioner into a grounded power

74
00:03:52.040 --> 00:03:53.950
wall outlet and press the reset
button.

75
00:03:54.600 --> 00:03:57.600
For optimal performance,
keep the portable air conditioner

76
00:03:57.600 --> 00:03:59.860
vents free and clear of any
obstructions.

77
00:04:00.120 --> 00:04:02.560
Dual hose air conditioner
quick installation.

78
00:04:03.010 --> 00:04:05.670
The dual hose portable air
conditioner comes equipped

79
00:04:05.680 --> 00:04:07.180
with a dual slotted vent panel.

80
00:04:07.640 --> 00:04:10.300
After snapping the integral clips
onto the vent panel,

81
00:04:10.520 --> 00:04:13.900
use the four screws to securely
attach the two window exhaust

82
00:04:13.900 --> 00:04:14.890
adapters.

83
00:04:14.890 --> 00:04:21.120
For model HAP0824TWD, the two window
exhaust adapters snap into the panel

84
00:04:21.120 --> 00:04:23.320
slots,
eliminating the need for screws.

85
00:04:23.920 --> 00:04:26.700
Orient the exhaust adapters
correctly and insert them

86
00:04:26.700 --> 00:04:28.200
into the designated slots.

87
00:04:29.230 --> 00:04:31.700
Slide the adapters until they
click into place.

88
00:04:35.820 --> 00:04:39.100
Flip the extension panel
and verify the exhaust adapters

89
00:04:39.100 --> 00:04:41.380
are fully inserted and seated
without gaps.

90
00:04:41.860 --> 00:04:45.480
Attach the two couplings on one end
of the hoses and clip the other end

91
00:04:45.480 --> 00:04:47.480
of the hoses to the exhaust adapters.

92
00:04:56.230 --> 00:04:59.440
Insert the window vent panel assembly
inside the window frame

93
00:04:59.590 --> 00:05:01.090
and close the window.

94
00:05:06.000 --> 00:05:08.760
Extend the vent hose to comfortably
attach it to the back

95
00:05:08.760 --> 00:05:10.410
of the dual hose portable air
conditioner.

96
00:05:12.760 --> 00:05:15.100
Slide both couplings
into their slots.

97
00:05:16.480 --> 00:05:18.860
Once connected,
follow the same instructions

98
00:05:18.860 --> 00:05:19.410
as before.