WEBVTT

1
00:00:04.700 --> 00:00:07.680
The Reliabilt cabinet series
meets your storage needs

2
00:00:07.680 --> 00:00:10.600
with effortless builds
and simple functionality.

3
00:00:11.980 --> 00:00:14.770
To assemble, you'll need a driver,
driver bits,

4
00:00:15.130 --> 00:00:16.630
and Phillips head screwdriver.

5
00:00:18.700 --> 00:00:21.230
Begin by connecting left
and right face frames

6
00:00:21.230 --> 00:00:25.210
with wooden dowel pins
and use a 1-inch flathead Phillips

7
00:00:25.210 --> 00:00:26.710
screw to secure them.

8
00:00:26.920 --> 00:00:30.290
Next, insert the bottom box panel
along the grooves of the face frame

9
00:00:30.290 --> 00:00:31.430
assembly.

10
00:00:31.430 --> 00:00:35.500
Secure using quarter braces and 1 1⁄2
inch round head Phillips screws.

11
00:00:37.030 --> 00:00:39.770
Following this,
slide the left front side panel

12
00:00:39.770 --> 00:00:41.540
into place and rotate the cabinet.

13
00:00:44.500 --> 00:00:48.830
Attach left front side panel and face
frame assembly using quarter braces

14
00:00:48.830 --> 00:00:51.040
and inch round head Phillips screws.

15
00:00:53.870 --> 00:00:57.790
The left front panel and bottom box
panel are then secured with quarter

16
00:00:57.790 --> 00:01:00.980
braces and inch round head
Phillips screws.

17
00:01:04.120 --> 00:01:07.510
Next, use 1 half inch round
Phillips head screws to attach corner

18
00:01:07.510 --> 00:01:09.470
braces to the right front side panel.

19
00:01:15.340 --> 00:01:18.560
Slide the right front side panel
into place and attach to the face

20
00:01:18.560 --> 00:01:20.060
frame assembly.

21
00:01:21.670 --> 00:01:24.500
Rotate and lay
with the right front side panel down.

22
00:01:27.660 --> 00:01:31.420
Corner braces and 1 half inch round
head Phillips screws are then used

23
00:01:31.600 --> 00:01:34.540
to secure the box bottom panel
to the right front side panel.

24
00:01:36.120 --> 00:01:38.440
Following this,
wooden dowel pins are inserted

25
00:01:38.440 --> 00:01:41.280
to the pre-drilled holes
along the right rear side panel.

26
00:01:42.020 --> 00:01:45.750
Next, connect the right rear side
panel to the left face frame

27
00:01:46.360 --> 00:01:49.230
and secure
using a 1-inch flathead Phillips

28
00:01:49.230 --> 00:01:50.160
screw.

29
00:01:50.160 --> 00:01:53.560
Use corner braces and inch round head
Phillips screws

30
00:01:54.020 --> 00:01:57.710
to attach the right rear side panel
and box bottom pedal.

31
00:01:58.860 --> 00:02:02.030
Follow by sliding the box back panel
into place.

32
00:02:02.360 --> 00:02:05.480
Connect using 1 inch flat head
Phillips screws.

33
00:02:06.340 --> 00:02:10.490
Secure the box back panel to the box
bottom panel with corner braces

34
00:02:10.650 --> 00:02:12.970
and one-half inch round head
Phillips screws.

35
00:02:13.730 --> 00:02:16.740
Next, press the left rear side panel
into place.

36
00:02:17.510 --> 00:02:21.300
Secure it to the box back panel
using one-inch flathead Phillips

37
00:02:21.300 --> 00:02:22.800
screws.

38
00:02:23.520 --> 00:02:26.130
Rotate and lay the left front side
panel down.

39
00:02:29.170 --> 00:02:31.760
Following this,
secure the left rear side panel

40
00:02:32.230 --> 00:02:36.740
and box bottom panel with corner
braces and inch round head

41
00:02:36.740 --> 00:02:38.240
Phillips screws.

42
00:02:38.710 --> 00:02:42.270
Attach the left rear side panel
and left front side panel

43
00:02:42.860 --> 00:02:46.400
using corner braces and inch round
head Phillips screws.

44
00:02:47.170 --> 00:02:51.200
Then, connect the left and right toe
kicks with wooden dowel pins

45
00:02:51.320 --> 00:02:54.380
and use a 1-inch flathead Phillips
screw to secure them.

46
00:02:56.330 --> 00:02:59.710
Using quarter braces and 1 inch round
head Phillips screws,

47
00:02:59.940 --> 00:03:02.050
join the toe kicks to the cabinet
box.

48
00:03:04.650 --> 00:03:06.150
Stand the cabinet upright.

49
00:03:08.310 --> 00:03:10.960
Next, place the bottom tray
inside the cabinet box.

50
00:03:12.870 --> 00:03:16.350
Use 1-inch flathead Phillips screws
to secure each side.

51
00:03:18.300 --> 00:03:20.640
Lower the top tray
to the pre-drilled holes

52
00:03:20.780 --> 00:03:24.050
and attach using
1-1⁄2-inch flathead Phillips screws.

53
00:03:25.560 --> 00:03:29.250
Next, connect the left and right door
panels with soft-close hinges

54
00:03:29.250 --> 00:03:32.690
LL and 5 1⁄8 inch flathead Phillips
screws.

55
00:03:34.440 --> 00:03:38.100
Install soft-close hinges
KK to the left door panel.

56
00:03:39.870 --> 00:03:43.450
Then, raise the door panel assembly
to the pre-drilled holes

57
00:03:43.850 --> 00:03:47.210
and secure using 5-1⁄8 inch
flathead Phillips screws.

58
00:03:49.770 --> 00:03:53.410
Built-in screws allow you to level
and adjust the door panel assembly.

59
00:03:55.770 --> 00:03:58.680
Continue by attaching rubber bumpers
to each corner.

60
00:04:01.170 --> 00:04:05.370
Lastly, attach and secure plastic
corner blocks to each corner

61
00:04:05.920 --> 00:04:08.600
using 1 half inch round head
Phillips screws.

62
00:04:11.600 --> 00:04:15.710
Streamline projects of every scope
and size with Reli-Built.

63
00:04:16.360 --> 00:04:18.050
Now available at Lowes.com.